Skip to content

Siemens Uni-PAK 5-Position Ring-Style Meter Center, 600A, 225A Max Tenant Main, No Bypass

0 Reviews
SKU
WP6512

The Siemens WP6512 is a five-position, ring-style Uni-PAK meter center for 120/240 V AC single-phase service, with a 600 A bus, 225 A maximum tenant main and no bypass. It has a NEMA 3R galvanized-steel enclosure, supports top- or bottom-fed service, and is specified for use only as service equipment.

  • Five Meter Positions
  • 600 A Bus Rating
  • 225 A Max Tenant Main
  • 120/240 V AC, Single Phase
  • No Bypass
  • NEMA 3R Enclosure

The Siemens WP6512 is a five-position, ring-style Uni-PAK meter center for 120/240 V AC single-phase service, with a 600 A bus, 225 A maximum tenant main and no bypass. It has a NEMA 3R galvanized-steel enclosure, supports top- or bottom-fed service, and is specified for use only as service equipment.

Product Overview

The Siemens WP6512 is a five-position, ring-style Uni-PAK meter center for 120/240 V AC single-phase service, with a 600 A bus, 225 A maximum tenant main and no bypass. It has a NEMA 3R galvanized-steel enclosure, supports top- or bottom-fed service, and is specified for use only as service equipment.

  • Five Meter Positions
  • 600 A Bus Rating
  • 225 A Max Tenant Main
  • 120/240 V AC, Single Phase
  • No Bypass
  • NEMA 3R Enclosure

Technical Specifications

Product information and specifications for the selected item.

SKU: WP6512

Product Information

BrandSiemens
MPNWP6512
SKUWP6512
UPC / GTIN040892875539
CategoryMeter Stacks

Key Specs

Meter Stack Amperage Rating (A)600 A
NEMA Enclosure RatingNEMA 3R
Phase1
Voltage Rating120/240 V AC
Type5-Position

Electrical Ratings

Meter Stack Amperage Rating (A)600 A
Voltage Rating120/240 V AC
Phase1
Service-equipment suitabilitySuitable only for use as service equipment
Maximum AIC100,000 A
N2/G terminal torque275 lb-in
Maximum short-circuit current rating100,000 RMS symmetrical
Top-right breaker position maximum200 A
Top-right branch breaker maximum200 A
Overload-trip indication and resetAn overload trip is indicated by the handle midway between ON and OFF; reset by moving it to OFF, then ON
A/B/N1 terminal torque375 lb-in
Equipment grounding terminal torque110 lb-in

Stack Configuration

Type5-Position
Supported breaker typesQP, QPH, HQP, MP-T, MP-HT, MP-MT, QS, QSH, QSHH, HQS, HQSH
Line lug configurationAl/Cu lay-in lugs
Conductor material and temperature requirementsCopper or aluminum, 60/75°C; observe breaker markings at breaker terminals
Permitted circuit breaker typesSiemens QS, QSH, QSHH, HQS, HQSH, QP, QPH, HQP, HQPH, MP-T, MP-HT, and MP-MT
Conductor temperature listingUL listed for 60/75°C conductors; consult equipment markings for application
Feed directionTop or bottom feed
Branch wiring exit locationsBranch wiring exits at the bottom and rear; neutral and ground exit at the bottom only
125 A breaker compatibilityStandard 125 A breakers accepted
Maximum main disconnecting means6
Service-feed optionsOverhead or underground service

Enclosure & Material

NEMA Enclosure RatingNEMA 3R
MaterialGalvanized Steel
Knockout plateRemovable
Mounting methodSurface-mounted
FinishANSI #61 light gray electrodeposited paint
Interior chemical exposureKeep petroleum-based sprays, chemicals, solvents, and paint away from interior components
Unmetered compartmentBarriered, sealable compartment for unmetered current-carrying parts

Dimensions & Weight

Height (in.)39.63
Width (in.)46.47
Length (in.)9

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.