Siemens Uni-PAK WP4411 4-Position Ring-Type Meter Center
0 Reviews
SKU
WP4411
The Siemens WP4411 is a ring-type, four-position meter center for 120/240 V AC, single-phase, three-wire service, with 125 A per meter position and a 400 A bus. It has a NEMA 3R galvanized steel enclosure and no bypass provision.
Four Ring-Type Meter Positions
125 A Per Meter Position
400 A Bus
120/240 V AC, Single-Phase, Three-Wire
NEMA 3R Galvanized Steel Enclosure
No Bypass Provision
The Siemens WP4411 is a ring-type, four-position meter center for 120/240 V AC, single-phase, three-wire service, with 125 A per meter position and a 400 A bus. It has a NEMA 3R galvanized steel enclosure and no bypass provision.
The Siemens WP4411 is a ring-type, four-position meter center for 120/240 V AC, single-phase, three-wire service, with 125 A per meter position and a 400 A bus. It has a NEMA 3R galvanized steel enclosure and no bypass provision.
Four Ring-Type Meter Positions
125 A Per Meter Position
400 A Bus
120/240 V AC, Single-Phase, Three-Wire
NEMA 3R Galvanized Steel Enclosure
No Bypass Provision
Technical Specifications
Product information and specifications for the selected item.
SKU: WP4411
Product Information
Brand
Siemens
MPN
WP4411
SKU
WP4411
UPC / GTIN
040892875232
Category
Meter Stacks
Key Specs
Meter Stack Amperage Rating (A)
400 A
NEMA Enclosure Rating
NEMA 3R
Phase
1
Voltage Rating
120/240 V AC
Type
4-Position 3-Wire
Electrical Ratings
Meter Stack Amperage Rating (A)
400 A
Voltage Rating
120/240 V AC
Phase
1
Service-equipment suitability
Suitable only for use as service equipment
Maximum AIC
65,000 A
N2/equipment-ground terminal torque
110 lb-in
A/B/N1 terminal torque
500 lb-in
Conductor temperature suitability
UL-listed for 60/75°C conductors; verify equipment markings for application
G terminal torque
275 lb-in
Stack Configuration
Type
4-Position 3-Wire
Terminal arrangement
3X2 studs, insulated
Feed direction
Top or bottom feed
Service-entry compatibility
Overhead or underground service
Compatible breaker types
QP, QPH, HQP, MP-T, MP-HT, MP-MT
Bypass provision
No bypass
Maximum main disconnecting means
6 disconnects
Branch wiring exits
Bottom and rear branch exits; neutral and ground exit at bottom only