Skip to content

Siemens VBII 1NO/1NC Isolated Auxiliary Contact Kit

0 Reviews
SKU
HA161234

The Siemens HA161234 is a VBII auxiliary contact kit providing one normally open and one normally closed isolated contact, rated for 10 A maximum at 125 VAC and 250 VAC. It is compatible with heavy-duty single-throw and double-throw safety switches; two kits are required per double-throw switch.

  • 1NO/1NC isolated contacts
  • Heavy-duty switch compatibility
  • 10 A maximum at 125/250 VAC
  • UL Listed
  • Make-after/break-before sequence
  • Crimp-on signal terminals

Product Overview

The Siemens HA161234 is a VBII auxiliary contact kit providing one normally open and one normally closed isolated contact, rated for 10 A maximum at 125 VAC and 250 VAC. It is compatible with heavy-duty single-throw and double-throw safety switches; two kits are required per double-throw switch.

Technical Specifications

Product information and specifications for the selected item.

SKU: HA161234

Product Information

BrandSiemens
MPNHA161234
SKUHA161234
UPC / GTIN783643173712
CategoryDisconnects & Safety Switches

Key Specs

Maximum Amperage (A)10
Disconnect TypeSafety Switch

Switch Ratings

Maximum Amperage (A)10
Rated voltage600 V

Disconnect Configuration

Disconnect TypeSafety Switch
FusedFused
Mounting screw torque30 lb-in
Mounting fastenersTwo 10-32 thread-rolling screws
Contact switching sequenceContacts make after and break before the main switch contacts
Contact configuration1 normally open (NO) and 1 normally closed (NC), isolated contacts
Auxiliary contact sequenceMakes after and breaks before the main switch contacts
Mounting locationMounted on top of the mechanism housing
Fastener torque30 lb-in
Signal-wire terminalsCrimp-on terminals are supplied for signal-wire connections
Host switch compatibilityHeavy-duty single-throw safety switches, Heavy-duty double-throw (DT) safety switches
Conductor routingRoute auxiliary conductors away from moving switch parts
Quantity required for DT switchesTwo kits required per DT switch
Mounting positionOn top of the mechanism housing

Enclosure & Certifications

Certifications and ListingsUL Listed
Electrical shieldElectrical shield fits around the auxiliary switch and wires to prevent an accidental short to ground
Installation safetyTurn off and lock out all power before installation; replace covers and shields before restoring power

Dimensions & Weight

Height (in.)3
Width (in.)3
Length (in.)4
Weight (lb.)0.243

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.