Skip to content

Siemens VBII Heavy-Duty Fusible Safety Switch, 30A, 600V, 3P/4W, Type 1 Indoor

0 Reviews
SKU
HF361NA

The Siemens HF361NA is a fused, 30 A, three-pole, 600 V heavy-duty indoor safety switch with mechanical lugs. Its listed specifications include fuse-dependent short-circuit and motor ratings, conductor ranges, and service-entrance suitability.

  • 30 A, Three-Pole, 600 V
  • Fuse-Dependent AIC Ratings
  • Three-Phase Motor Ratings
  • Mechanical-Lug Conductor Range
  • Service-Entrance Suitability
  • Line-Side Barrier Shields

The Siemens HF361NA is a fused, 30 A, three-pole, 600 V heavy-duty indoor safety switch with mechanical lugs. Its listed specifications include fuse-dependent short-circuit and motor ratings, conductor ranges, and service-entrance suitability.

Product Overview

The Siemens HF361NA is a fused, 30 A, three-pole, 600 V heavy-duty indoor safety switch with mechanical lugs. Its listed specifications include fuse-dependent short-circuit and motor ratings, conductor ranges, and service-entrance suitability.

  • 30 A, Three-Pole, 600 V
  • Fuse-Dependent AIC Ratings
  • Three-Phase Motor Ratings
  • Mechanical-Lug Conductor Range
  • Service-Entrance Suitability
  • Line-Side Barrier Shields

Technical Specifications

Product information and specifications for the selected item.

SKU: HF361NA

Product Information

BrandSiemens
SKUHF361NA
CategoryDisconnects & Safety Switches

Key Specs

Maximum Amperage (A)30
Maximum Wattage (W)0
Phase Type3 Phase
Disconnect TypeSafety Switch
NEMA Enclosure RatingNEMA 1

Switch Ratings

Maximum Amperage (A)30
Maximum Wattage (W)0
Phase Type3 Phase
Three-phase horsepower rating at 480 V AC5 hp standard with non-time-delay fuses; 15 hp maximum with time-delay fuses
Short-circuit rating by fuse class10,000 with Class H fuses; 200,000 with Class R and J fuses AIC
I²t rating50,000 A²·s
Overload current rating12Ă—; exceeds the 10Ă— industry standard
Rated supply frequency50/60 Hz
AIC rating by fuse class10,000 with Class H fuses; 200,000 with Class R and J fuses AIC
Design E motor compatibilityHorsepower ratings also apply to Design E motors without derating
Three-phase horsepower rating at 600 V AC7.5 hp standard with non-time-delay fuses; 20 hp maximum with time-delay fuses
600 V DC short-circuit rating100,000 with Class R or J fuses AIC
Mechanical service life10,000 (typical) switching cycles

Disconnect Configuration

Disconnect TypeSafety Switch
FusedFused
Switching actionQuick-make and break switching action
Lug conversionFront-removable lugs can be converted to copper-body or compression-type lugs
Line, load and neutral wire range60/75°C Cu/Al conductors; #12–6 AWG aluminum or #14–6 AWG copper
Electrical connectionMechanical lugs
Mounting methodSurface fastening; 2-3 point mounting holes
Blade constructionDouble-break visible blade design
Cover interlockDefeatable dual cover interlock
Wire-bending spaceMeets NEC wire-bending-space requirements
Position indicationHighly visible ON/OFF indication
Ground wire range#14–4 AWG

Enclosure & Certifications

NEMA Enclosure RatingNEMA 1
Certifications and ListingsUL Listed
Line-side barrier protectionInternal shields meet NEC 2020 230.62 line-side barrier requirements
Service entrance suitabilitySuitable for use as service entrance equipment
Enclosure material and thicknessCold-rolled steel, 0.054 in thick (17 gauge)
FinishANSI #61 grey paint

Dimensions & Weight

Height (in.)15.45
Width (in.)9.01
Length (in.)10.17
Weight (lb.)13

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.