Skip to content

12/2 NM-B (Romex) Cable

0 Reviews
SKU
12/2 NM ROMEX-FT

Southwire Romex SIMpull 12/2 NM-B cable contains two 12 AWG solid copper insulated conductors and a 12 AWG ground beneath a yellow PVC jacket. It is rated 600 V, specified for exposed or concealed work in dry locations, and listed as cut by the foot.

  • 12/2 Solid Copper Conductors
  • 600 V Rating
  • 20 A Ampacity at 60°C
  • Dry-Location NM-B Cable
  • Yellow PVC Jacket
  • Cut by the Foot

Product Overview

Southwire Romex SIMpull 12/2 NM-B cable contains two 12 AWG solid copper insulated conductors and a 12 AWG ground beneath a yellow PVC jacket. It is rated 600 V, specified for exposed or concealed work in dry locations, and listed as cut by the foot.

Technical Specifications

Product information and specifications for the selected item.

SKU: 12/2 NM ROMEX-FT

Product Information

BrandSouthwire
MPN12/2 NM ROMEX-FT
SKU12/2 NM ROMEX-FT
CategoryNM-B Cable

Key Specs

Wire Gauge12/2
Conductor MaterialCopper
Stranded or SolidSolid
Jacket ColorYellow

Electrical & Conductor

Wire Gauge12/2
Conductor MaterialCopper
Stranded or SolidSolid
Inductive reactance at 60 Hz0.054 Ω/1000ft
NEC 240.4(D) overcurrent-protection limit20 A
DC resistance at 25°C1.662 Ω/1000ft
AC resistance at 75°C2.063 Ω/1000ft
Material standardASTM B3
Electrical code referenceNational Electrical Code, NFPA 70
Conductor insulation temperature rating90 °C
Insulated conductor color codeBlack and white
Voltage rating600 V
Allowable ampacity at 60°C20 A

Package & Length

Bundle/SingleSingle Product
Wire Cut TypeCut By-The-Foot

Jacket & Features

Jacket ColorYellow
FeaturesJacketed
Installation conditionsSuitable for exposed or concealed work in dry locations; ampacity is limited to that for 60°C conductors.
Jacket materialPVC
Safety standardNOM-063-SCFI Electrical Products – Conductors – Safety Requirements
Masonry-wall installationMay be run in air voids of masonry block or tile walls only where the walls are not wet or damp.
Ground-wire wrappingKraft paper wrap
Jacket thickness25 mil
Individual-conductor installation restrictionIndividual conductors are not recognized as THHN or another NEC conductor type and must not be installed apart from the complete NM-B cable.
RoHS complianceRoHS-2 (European Directive 2011/65/EU)
Insulation constructionPVC insulation with a nylon sheath
Typical applicationPrimarily used for residential branch circuits serving outlets, switches, and other loads.
Federal specificationA-A-59544
Insulation thickness16 mil
UL standardUL 719, Nonmetallic-Sheathed Cables, UL 83 (conductor construction)

Dimensions & Weight

Height (in.)0.19
Width (in.)0.422
Length (in.)12
Minimum bending radius0.8 in

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.