Skip to content

Square D Homeline Single-Pole Tandem Circuit Breaker, 20/20A

0 Reviews
SKU
HOMT2020CP

The Square D Homeline HOMT2020CP is a plug-on tandem circuit breaker with two single-pole breakers rated 20 A each, arranged to occupy one load-center space. It has standard-trip operation, a non-neutral connection, and a HACR rating; the specified conductor range is 14–8 AWG aluminum or copper.

  • Two 20 A Single-Pole Breakers
  • One-Space Tandem Format
  • Plug-On Mounting
  • Standard Trip
  • Non-Neutral Connection
  • HACR Rated

Product Overview

The Square D Homeline HOMT2020CP is a plug-on tandem circuit breaker with two single-pole breakers rated 20 A each, arranged to occupy one load-center space. It has standard-trip operation, a non-neutral connection, and a HACR rating; the specified conductor range is 14–8 AWG aluminum or copper.

Technical Specifications

Product information and specifications for the selected item.

SKU: HOMT2020CP

Product Information

BrandSquare D
MPNHOMT2020CP
SKUHOMT2020CP
UPC / GTIN047569071065
CategoryCircuit Breakers

Key Specs

Maximum Amperage (A)20
Voltage120 V AC
Interruption TypeStandard Trip
Breaker TypeTandem
Mounting TypePlug-On
Neutral Connection TypeNon-Neutral

Electrical Ratings

Maximum Amperage (A)20
Voltage120 V AC
Interruption TypeStandard Trip
Conductor temperature rating60 or 75 °C
AC frequency50/60 Hz
Ambient air temperature for operation104 °F
Supported conductor size and material14–8; one cable; aluminium/copper AWG
Conductor wire size and material1 x 14–8 AWG; aluminum/copper

Breaker Configuration

Breaker TypeTandem
Mounting TypePlug-On
Neutral Connection TypeNon-Neutral
Series TypeHomeline
Branch terminal connectionBox lugs
Load-center spaces required1 space
Double-row bus compatibilityFor double-row bus construction, the bus-bar connector must have a slot at the centerline of the desired pole space.
Trip indication and resetA mid-position handle indicates a trip; reset by moving the handle to OFF, then ON.
Panel spaces occupied1 space
Electrical connectionScrew clamp terminals
Line/load connection suitabilitySuitable for reversed line and load connections
Single-row bus compatibilityFor single-row bus construction, the bus-bar connector must have the configuration shown in Figure 3.
Panel compatibility requirementUse only in single-phase load centers marked for tandem breakers.
Terminal tightening torque35.4 lbf·in

Pack & Smart Features

Bundle/SingleSingle Product
Pack OptionsSingle Item

Certifications

Certifications and ListingsROHS, UL Listed
HACR ratingHACR rated
California Proposition 65 warningMay expose users to Nickel (Metallic), identified by California as a chemical known to cause cancer.

Dimensions & Weight

Height (in.)3.13
Width (in.)1
Length (in.)2.98
Weight (lb.)0.4

Product Documents

  • Digest Section 1: Load Centers — Homeline Tandem and Quad Tandem Circuit Breakers Other Open / download file
  • Product Environmental Profile — Homeline Miniature Circuit Breakers (PEP EcoPassport SCHN-2013-033-V0) Other Open / download file
  • CSA Certificate of Compliance 1052568 — HOMT/CHOMT Series 1 Circuit Breakers Certification compliance Open / download file
  • UL Certificate of Compliance — Type HOMT Series 1 Molded Case Circuit Breakers Certification compliance Open / download file
  • Square D/Schneider Electric Residential Product Limited Warranty — Instruction Bulletin 0102PL1901 Warranty Open / download file
  • Circuit Breaker Installation for Homeline Combination Service Entrance Devices — Instruction Bulletin 40270-308-05 Installation manual Open / download file
  • Product data sheet — HOMT2020CP Spec sheet Open / download file
  • Square D HOMT2020CP product datasheet Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.