Skip to content

Square D PK15GTA 15-Terminal Equipment Ground Bar Kit

0 Reviews
SKU
PK15GTA

The Square D PK15GTA is a 15-terminal aluminum equipment ground bar kit specified for QO/Homeline load centers, 100 A QO main-breaker applications, and NQOD 24-circuit panelboards up to 225 A. It accepts AWG 14–4 copper or AWG 12–4 aluminum conductors and includes two mounting screws and one equipment grounding label.

  • 15 Terminals
  • QO/Homeline Load Centers
  • NQOD 24-Circuit Panelboards
  • Copper and Aluminum Conductor Ranges
  • Two Mounting Screws and Label
  • Aluminum Direct-Mount Bar

Product Overview

The Square D PK15GTA is a 15-terminal aluminum equipment ground bar kit specified for QO/Homeline load centers, 100 A QO main-breaker applications, and NQOD 24-circuit panelboards up to 225 A. It accepts AWG 14–4 copper or AWG 12–4 aluminum conductors and includes two mounting screws and one equipment grounding label.

Technical Specifications

Product information and specifications for the selected item.

SKU: PK15GTA

Product Information

BrandSquare D
MPNPK15GTA
SKUPK15GTA
UPC / GTIN785901026419
CategoryGround Bars & Busbars

Key Specs

Length (in.)0.312
Width (in.)5.63

Capacity & Compliance

REACH SVHC statusNo SVHC present above the 0.1% threshold at part level
REACH Annex XVII restricted substancesNo substance under REACH Annex XVII restrictions is used within the scope of restriction
EU RoHS statusPro-active compliance without exemption; product is outside EU RoHS legal scope
Conductors per terminalUp to 3 wires per terminal
Conductor size and material14–4 AWG copper; 12–4 AWG aluminium
California Proposition 65 warningWarning: Cancer and Reproductive Harm
Tightening torque by wire size20 lb.in for AWG 14–10 copper; 20 lb.in for AWG 12–10 aluminium; 25 lb.in for AWG 8; 35 lb.in for AWG 6–4; 25 lb.in for AWG 14–12 copper; 25 lb.in for AWG 12–10 aluminium
Installation safetyInstallation and servicing by qualified electrical personnel only; turn off supply power and verify it is off with a properly rated voltage-sensing device before work.
Specified load-center familyQO/Homeline load centers
Accepted conductor combinationsCopper: (1) #14–#4 or (2) #14/#12; aluminum: (1) #12–#4 or (2) #12/#10 AWG

Dimensions & Weight

Height (in.)0.437
Width (in.)5.63
Length (in.)0.312
Weight (lb.)0.135
Mounting-hole preparationIf the enclosure has no mounting holes, use a #26 drill bit to make two 0.147-in (3.7-mm) mounting holes in the back, using the grounding bar as a template.
Mounting screw torque30 lb.in
Mounting methodDirect mounting to the back of the enclosure
Ground bar materialAluminum
Drilling guidance when enclosure has no mounting holesIf no mounting holes are present, drill two 0.147-in (3.7-mm) holes with a #26 bit using the bar as a template; keep metal shavings out of the interior components.
Included mounting hardware2 mounting screws
Included hardware and label2 mounting screws and 1 equipment grounding label
Mounting pattern optionsWith one mounting hole and two nubs, place the bar’s outer mounting holes over the nubs and use one center screw; with two mounting holes, use two screws.

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.