Skip to content
Gardner Bender

Tan Twist-On Wire Connector

0 Reviews
SKU
13-1H1-100

Gardner Bender's Hex-Lok H1 is a tan, hex-head twist-on connector for copper-to-copper wire connections from #22 to #8 AWG. It is rated up to 600 V for building wire and 1,000 V for lighting fixtures and signs.

  • Wire Range: #22–#8 AWG
  • Copper, Solid or Stranded
  • Voltage Ratings
  • UL 486C Listed and CSA Certified
  • Polypropylene Shell and Steel Spring
  • Hex Head for 5/16-Inch Socket

Product Overview

Gardner Bender's Hex-Lok H1 is a tan, hex-head twist-on connector for copper-to-copper wire connections from #22 to #8 AWG. It is rated up to 600 V for building wire and 1,000 V for lighting fixtures and signs.

Technical Specifications

Product information and specifications for the selected item.

SKU: 13-1H1-100

Product Information

BrandGardner Bender
MPN13-1H1-100
SKU13-1H1-100
CategoryTerminals, Splices & Connectors

Key Specs

Wire Connector TypeTwist-On Connector
Minimum Wire Gauge22
Color FamilyBeige

Connector & Wire

Wire Connector TypeTwist-On Connector
Minimum Wire Gauge22
Typical applicationGeneral-purpose connections of two or more copper wires
Conductor materialCopper conductors only
Supported conductor constructionSolid and/or stranded wire connections
Starting the connectionScrew on the connector; push wires firmly into it when starting
Inner spring constructionZinc-plated, square-profile steel wire
Shell materialPolypropylene
Wire strip length7/16 in (11.1 mm); for 16 AWG stranded wires, 1/2 in (12.7 mm)
UL listingListed per UL 486C; file number 61X5
Voltage rating600 max. for building wire; 1000 max. for lighting, fixtures/luminaries and signs V
CSA certificationCSA certified
Wing designOffset swept wings provide added grip and installation torque
Wire preparationPre-twisting is unnecessary; hold stripped wires with ends even and lead stranded wires slightly
Flame retardancyUL94V-2 flame retardant
Turns to achieve torqueFew turns are needed to meet required torque
Temperature rating105 °C (221 °F)
Shell chemical resistanceShell resists chemicals
Over-torque behaviorHex-head design strips out at UL torque to limit over-torquing
Compatible installation tool5/16" hex-type socket wrench
Conductor alignmentAlign any frayed strands or conductors before installation
Maximum voltage rating600 V max. for building wire; 1000 V max. for lighting fixtures and luminaries/signs
Compatible hex socket size5/16 in
Work precautionsShut off power before circuit work; use approved materials and follow electrical codes
Conductor strip length7/16 in
Pull-out and dielectric performanceMeets or exceeds UL pull-out and dielectric test requirements

Color & Finish

Color FamilyBeige

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.