Skip to content
Thomson Power Systems

Thomson Power Systems TS 910 100A 3-Pole Service-Entrance Automatic Transfer Switch

0 Reviews
SKU
TS913A0100B + TS913-N3R100B

The Thomson Power Systems TS 910 is a 100 A, 3-pole automatic transfer switch for 120/208 V, 3-phase, 4-wire systems with neutral and a maximum voltage of 240 V. It is service-entrance rated with a built-in disconnect, non-fused, UL Listed, and specified as NEMA 3R for outdoor use. Its short-circuit current rating is 10 kA.

  • 100 A, 3-Pole Rating
  • 120/208 V, 3-Phase System
  • Service-Entrance Disconnect
  • NEMA 3R Outdoor Enclosure
  • Non-Fused, UL Listed
  • 10 kA Short-Circuit Rating

Product Overview

The Thomson Power Systems TS 910 is a 100 A, 3-pole automatic transfer switch for 120/208 V, 3-phase, 4-wire systems with neutral and a maximum voltage of 240 V. It is service-entrance rated with a built-in disconnect, non-fused, UL Listed, and specified as NEMA 3R for outdoor use. Its short-circuit current rating is 10 kA.

Technical Specifications

Product information and specifications for the selected item.

SKU: TS913A0100B + TS913-N3R100B

Product Information

BrandThomson Power Systems
MPNTS913A0100B + TS913-N3R100B
SKUTS913A0100B + TS913-N3R100B
CategoryAutomatic Transfer Switches

Key Specs

Maximum Amperage (A)100
FusedNon-Fused
Automatic/ManualAutomatic
Certifications and ListingsUL Listed

Electrical Ratings

Maximum Amperage (A)100
FusedNon-Fused
Power-cable lug ranges and torquesUtility: #3 AWG–300 MCM, 250 in·lbf; generator: #3–1/0 AWG, 50 in·lbf; neutral and ground: #12–1/0 AWG, 50 in·lbf each.
Terminal conductor ratings per phaseGenerator: 1 conductor per phase, #3–1/0; utility: 1 conductor per phase, #3–300 MCM
Short-circuit interrupting rating10 kA RMS symmetrical
Cable conductor material compatibilityCopper or aluminum
Short-circuit current rating10 kA
Source overcurrent protectionIntegral overcurrent protection on the utility source; upstream overcurrent protection required for the generator source.
Control-wiring requirementsMinimum #14 AWG; control wiring must be routed separately from power cabling.
Utility overcurrent-protection typeNon-adjustable thermal-magnetic
Load-content limitsCombined motor full-load current and other load ratings must not exceed the switch rating; tungsten load must not exceed 30% of the switch rating.
Upstream circuit-breaker protection guidanceContact factory for details of required upstream circuit-breaker protection
Power-cable material compatibilityCopper or aluminum conductors
Maximum voltage rating240 V
Operating frequency50/60 Hz
System connection120/208 V, 3-phase, 4-wire, with neutral
Supply configuration120/208, 3-phase, 4-wire with neutral V
Supply frequency50/60 Hz
Maximum continuous loading80 % of rating

Transfer & Features

Automatic/ManualAutomatic
FeaturesMountable, On Indicator Light, Overload Protection
Service-equipment setupWhen used as service equipment, connect the bonding strap to neutral and apply the supplied Service Disconnect label below the breaker toggle.
Generator start interface2-wire remote-start input; dry contact closes to start and opens to stop.
Standby-use limitationNot intended for legally required standby applications for emergency power systems.
Installation humidity range5–95, non-condensing %
Installation temperature range+5° to +122°F (-15° to +50°C) °F; °C
Enclosure materialRust-resistant aluminum

Certifications

Certifications and ListingsUL Listed

Product Documents

  • Two Year Limited Warranty — Automatic Transfer Switch, Models TS 910 and TS 920 Warranty Open / download file
  • TS 910 & TS 920 Automatic Transfer Switches — Installation, Operating & Service Manual (PM147 Rev 4) Manual Open / download file
  • Quick Start Guide — TS 910 & TS 920 (PM148 Rev 1) Installation manual Open / download file
  • Series TS 910 — 100–400 Amp Automatic Transfer Switch Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.