Skip to content

Universal Voltage Occupancy Sensor Power Pack

0 Reviews
SKU
BZ-150

The Wattstopper BZ-150 is an indoor occupancy-sensor power pack for light control, with 120/277 VAC, 50/60 Hz input and 24 VDC, 225 mA output when the relay is connected. Its operating mode is field-selectable between Auto ON and Manual ON.

  • 120/277 VAC, 50/60 Hz Input
  • 24 VDC, 225 mA Output
  • Lighting and Motor Load Ratings
  • Auto ON or Manual ON
  • Four 12–24 VDC Control Inputs
  • Power for At Least Three Sensors

Product Overview

The Wattstopper BZ-150 is an indoor occupancy-sensor power pack for light control, with 120/277 VAC, 50/60 Hz input and 24 VDC, 225 mA output when the relay is connected. Its operating mode is field-selectable between Auto ON and Manual ON.

Technical Specifications

Product information and specifications for the selected item.

SKU: BZ-150

Product Information

BrandWattstopper
MPNBZ-150
SKUBZ-150
CategoryDevice Accessories

Accessory & Compatibility

Accessory TypeLight Control
Hold OFF input behavior12–24 VDC opens the relay; overrides Control ON and Hold ON
DC output24 VDC, 225 mA (with relay connected)
Mounting connection1/2-in snap-in nipple for 1/2-in knockouts
Hold ON input behavior12–24 VDC closes the relay; overrides Control ON
Input voltage and frequency120/277 VAC, 50/60 Hz
Safety listingUL and cUL listed
Manual ON/OFF input behaviorMomentary 12–24 VDC input changes the relay to the opposite state
Low-voltage lead rating300 V
Mode-switch change procedureRemove power while changing the setting, or cycle power afterward
Electronic ballast load rating16 A at 277 VAC
Output class and parallel interconnectionClass 2 output; suitable for parallel interconnection of up to 10 units
Operating temperature32–104°F (0–40°C)
Motor load rating1 HP at 120/240 VAC
Sensor power capacityAt least 3 sensors
Operating modeField-selectable Auto ON or Manual ON
Plenum ratingUL 2043 plenum rated
Enclosure rating94 V-0
Low-voltage control inputsFour inputs, 12–24 VDC
Ballast/incandescent load rating20 A at 120/277 VAC
Overcurrent protectionBuilt-in short-circuit and thermal protection shuts down the 24 VDC output
Relay wire gauge14 AWG for 20 A operation
Use environmentIndoor use only
RoHS complianceMeets RoHS material restrictions
Low-voltage cable requirementUL-listed 18–22 AWG, 3-conductor Class 2 cable

Dimensions & Weight

Height (in.)1.6
Width (in.)2.75
Length (in.)1.6

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.