Skip to content
MEAN WELL

XLG-150 Series 150W 12V LED Driver

0 Reviews
SKU
XLG-150W-12

The MEAN WELL XLG-150W-12 is a 150 W LED driver with 100–305 VAC input, 12 V nominal output at 12.5 A, and an 8.4–12 V constant-current region. It has an IP67-rated metal housing.

  • 150 W Rated Output
  • 12 V, 12.5 A Output
  • 100–305 VAC Input
  • 8.4–12 V Constant-Current Region
  • IP67 Metal Housing
  • 5-Year Warranty

Product Overview

The MEAN WELL XLG-150W-12 is a 150 W LED driver with 100–305 VAC input, 12 V nominal output at 12.5 A, and an 8.4–12 V constant-current region. It has an IP67-rated metal housing.

Technical Specifications

Product information and specifications for the selected item.

SKU: XLG-150W-12

Product Information

BrandMEAN WELL
MPNXLG-150W-12
SKUXLG-150W-12
CategoryLED Drivers & Ballasts

Electrical

Wattage Range150 W
Typical efficiency91.5 %
AC input voltage range100–305 VAC
Inrush current50 typical cold-start inrush; 500 μs pulse width measured at 50% Ipeak (230 VAC) A; μs
Power factor≥0.97 at 115 VAC; ≥0.95 at 230 VAC; ≥0.92 at 277 VAC, full load
DC output lead identificationV− black; V+ red; 2-conductor SJOW 14 AWG output lead
No-load power consumption<0.5 W
Rated output current12.5 A
Input frequency range47–63 Hz
AC input lead identificationAC/N blue; AC/L brown; FG green/yellow
Ripple and noise (maximum)≤150 mVp-p
Total harmonic distortion<10% at load ≥50% for 115/230 VAC input and load ≥75% for 277 VAC input

Compatibility & Operation

Product typeLED Drivers
LED operating-mode compatibilityConstant-current direct drive, or constant-voltage operation usually through an additional DC/DC driver.
Rated-current ambient limit55 at 230 VAC; 40 at 100 VAC, at rated current in constant-current mode °C
Working humidity20–95, non-condensing % RH
Cooling designFanless
Operating case temperature-40 to +90 °C
Overcurrent protection95–108% of rated current; hiccup mode or constant-current limiting, with automatic recovery after fault removal
Short-circuit responseHiccup mode or constant-current limiting; automatically recovers after the fault condition is removed
Overtemperature responseShuts down the output; repowering is required to recover

Certifications & Warranty

Ratings & CertificatesCULUS, ROHS
Warranty5 Years
ESD immunity test level8 air discharge; 4 contact discharge kV
Surge immunity test level4 line-to-neutral; 6 line/neutral-to-PE kV
MTBF2269.5k minimum (Telcordia SR-332); 213.3k minimum (MIL-HDBK-217F at 25°C)

Dimensions & Weight

Height (in.)1.398
Width (in.)2.48
Length (in.)7.087
Weight (lb.)1.764
Housing materialMetal housing
Mounting holes4 mounting holes, Ø4.5 mm

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.